Adding a linked clip to a playlist, Introduction – EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual User Manual

Page 85

Advertising
background image

How to Replace a Portion of Playlist Element by
another Clip

To do so, proceed as follows:

1. Browse the playlist element until the first frame of the A/V material to be removed. To

browse a playlist element, you can load it from the Playlist Panel to a Control Panel.

2. Right-click the element to be split in the playlist grid.

The Playlist Element contextual menu is displayed.

3. Select Split Element.

The playlist element is split at the selected timecode. A second element is displayed
in the Playlist grid with the same name as the first one.

Note

Step 2 and 3 can be replaced by the

shortcut.

4. Load this second playlist element on a Control Panel.

5. Browse the playlist element until the timecode from which you want to keep the A/V

material.

6. Mark a new IN point.

7. Click the Update Element button.

The second playlist element is trimmed and the portion of undesirable A/V material is
removed.

8. In the Database Explorer, for example, select the clip(s) you want to insert between

the two playlist elements.

9. Drag it/them between the two playlist elements in the Playlist grid.

In the end, a portion of A/V material has been replaced by another one.

The transition between the elements is automatically set as "Cut".

During playout, depending on the option selected for the When Splitting an Element
setting under Tools > Settings > Playlist > General, the system will stop on the last
frame of the inserted element or apply an automatic transition between the inserted
element and the next one. See section "General Settings" on page 131.

1.5.10. Adding a Linked Clip to a Playlist

Introduction

A linked clip is a clip that was created at the same time as the clip already present in the
playlist but taken from a different record train. For example when recording a show with a
main transmission cut and several isolated camera angles, if clips are created
simultaneously on all angles, these would be given a linked clip status by IPDirector.

IPDirector - Version 6.00 - User Manual - Playlist Panel

1. Playlist Panel

75

Advertising