EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 92)

1.6. Playout Effects and Parameters
1.6.1. Overview of the Section
This section is intended to describe the effects which can be applied during the playout of
a playlist and how they can be achieved.
It provides information on the following topics:
Section
"Adding Audio and/or Video Transition Effects" on page 82
"Setting the Playout Speed" on page 86
"Stopping and/or Starting Automatically the Playout of a Playlist" on page 88
"Resetting Playout Parameters to Default" on page 94
"Inserting a Freeze Effect in a Playlist Element" on page 94
"Adjusting Audio Levels" on page 96
"Using Action Tags into a Playlist to Trigger Transport Functions or Playout Effects" on
page 97
"Applying a Macro Command to Trigger Playout Effects" on page 106
"Skipping an Element in the Playlist" on page 108
"Looping Playlist Elements During Playout" on page 109
"Associating an Auxiliary Audio Clip to a Playlist" on page 118
"Working with End Cue" on page 119
"Working with Post-Roll" on page 122
"Using As Run Log" on page 124
1.6.2. Adding Audio and/or Video Transition Effects
Introduction
The user can define audio and video transition effects between elements of a playlist.
Default values are defined in the Tools > Settings > Playlist > Playlist / Default
Transition category. See section "Default Transition Settings" on page 134 for details on
the settings options.
Seven video effects are available. Audio effects depend on the applied video effect. The
table below summarizes the possible associations of video and audio effects.
82 1. Playlist Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B