Setting the playout speed, Introduction, Super slow motion clip – EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual User Manual

Page 96: Setting the playout speed of some elements, Possible ways

Advertising
background image

If the ESC key is used on the keyboard, the editable area is exited and the original cell
value is restored.

If the ENTER key is pressed or a different area is clicked on, the modifications will be
validated.

The selected transition effects and corresponding durations appear in the Video Effect,
Audio Effect, Video Effect Duration and Audio Effect Duration columns of the playlist
grid.

1.6.3.

Setting the Playout Speed

Introduction

The default speed value is defined in the Tools > Settings > Playlist > Playlist /
Default Transition
category. See section "Default Transition Settings" on page 134 for
details on the settings options.

The users can define a different playout speed for each element of a playlist or they can
set a custom speed only for the air-element.

Super Slow Motion Clip

A super slow motion (SLSM) clip can be inserted in a playlist with its own speed, which
means 33% for "SLSM clips 3x" or 50% for "SLSM clips 2x". This will be applied if two
conditions are fulfilled:

The Insert SLSM Clips at Slo-mo Speed setting has been selected. If the setting is
not selected, the default speed defined in "Default Transition Settings" on page 134 is
taken into account.

The SLSM clip is added to the playlist directly from the IPDirector interface.

Setting the Playout Speed of some Elements

Possible Ways

The speed can be set in two different ways:

through the Playlist Element contextual menu

by direct entry/selection in the playlist grid

These settings are permanent; they will be used each time the element is played.

86

1. Playlist Panel

EVS Broadcast Equipment S.A. - November 2012

Issue 6.00.B

Advertising