EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 30)

Menu Item Description
Cut Used in a Cut and Paste operation to move the selected element(s).
Copy Used in a Copy and Paste operation to copy the selected element(s).
Paste Used in a Cut and Paste or Copy/Paste operation to paste the cut or
copied element(s).
The elements are inserted in the playlist before or after the element
selected when the Paste operation is initiated. This depends on the
Insert Mode in Playlist parameter of the Playlist settings. See the
Tools > Settings > Playlist > Playlist/General category.
All these functions are described in details in "Playlist Editing" on page 60 and "Playout
Effects and Parameters" on page 82.
Selection of Elements
The selection of elements in a playlist follows the selection rules applicable in any
Windows-based application.
Selecting elements in a playlist is performed as follows:
• To select contiguous elements, click the first element, press SHIFT and click the last
element.
• To select non contiguous elements, keep CTRL pressed while selecting the
elements.
• To select a group of clips, click the group heading.
1.2.5. Status Bar
Introduction
This area displays information regarding lock on air position, Auxiliary Clip, End Cue, As
run log, Post-Roll and the number of elements present in the playlist.
The Total playlist duration, the END CUE area, the As Run Log area and the post-Roll
area are displayed only if this has been set under Tools > Settings > Playlist > Colors.
Lock On-Air Position Button
changes to
This option is used to keep the on-air element always visible in the playlist panel.
20 1. Playlist Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B