EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 123)

Creating Loops
How to Activate the Global Loop Mode
To loop on the entire playlist, proceed as follows:
1. Open a playlist.
2. Click the LOOP button
OR
Press the key on the keyboard.
The LOOP button changes from to .
The playlist will loop when it reaches its end.
Note
To remove a full loop, click the LOOP button or press the key on
the keyboard again.
How to Define a Partial Loop
You can create a partial loop inside a playlist by using either the playlist element
contextual menu or the partial loop shortcut. See section "Use of Loops and Groups" on
page 111 for more information on what is allowed or not.
If you use the contextual menu, proceed as follows:
1. Select one or several elements you want to be included in a loop inside the playlist.
2. Right-click one of the element of the selection.
The Playlist Element contextual menu opens.
3. Select LOOP from the contextual menu.
The Define Loop window is displayed:
IPDirector - Version 6.00 - User Manual - Playlist Panel
1. Playlist Panel 113