EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 47)

IPDirector can be used to create and finalize (close) this specific Playlist.
For more information about EditRec, refer to the EditRec manual.
Procedure
Proceed as follows to prepare an Editrec playlist in IPDirector.
Note
You need to launch an Editrec configuration on the associated EVS server.
1. In the Playlist Panel, create a new playlist and tick Editrec Playlist check box in the
Create a New Playlist window.
This creates a new "open" playlist that contains a black clip of 23h55m.
2. Load the playlist on one of the Editrec channels.
The users can then directly edit the playlist with a linear editing controller device.
3. When the playlist is finalized, close the playlist in IPDirector by clicking the E/E
button.
This closes the playlist and removes the black clip extension at the beginning and end
of the playlist (initially used for the Tape simulation). The playlist then becomes a
standard LSM playlist.
1.4.4. Opening and Loading a Playlist
Definitions
Opening a Playlist
Opening a playlist in the Playlist Panel consists of displaying all playlist information in the
Playlist Panel, when no channel is associated with it. All functions are dimmed and
inactive with the exception of the Player field, the LSM ID field and the Playlist grid which
can be accessed. Elements can be added, removed and re-ordered, transition types and
durations can be modified but the playlist cannot be viewed or played on the EVS server
output or on the Software Player.
Loading a Playlist
The action of loading a playlist means that a player must be associated with the Playlist
Panel to load a playlist on it.
When a player has been associated with the Playlist Panel, a playlist can be loaded on it
and played back to air.
When an off-line playlist is loaded on the Playlist Panel, it automatically becomes on-line
on the EVS server of the controlled channel.
IPDirector - Version 6.00 - User Manual - Playlist Panel
1. Playlist Panel 37