EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 119)

As the event on-air is highlighted in dark green; and the next event to air in light green,
elements which will be skipped are located between these two highlighted lines.
2. Repeat step 1 as many times as you want elements to be skipped. If the SKIP button
is clicked twice, the next two elements will be skipped, and so on.
Note
If the SKIP button is clicked within a loop, the SKIP function takes the loop into
account and elements played out remain inside the loop. This does not affect the
loop counter.
1.6.11. Looping Playlist Elements During Playout
Purpose
It is possible to define a loop on a series of consecutive elements of a playlist or on the
whole playlist. This enables the playout of this set of elements several times without any
intervention. The user can choose if the loop must be played a number of times or
indefinitely. He can also select the way the loop will be exited.
Loop Types
Introduction
The loop type determines whether the loop will be played a defined number of times or
indefinitely.
Global Loop Mode
The Global Loop mode is activated with the LOOP button:
↔ OR the shortcut.
In this case, the entire playlist will be played in loop mode: the loop is applied on all the
elements.
When playlists are played on ganged player channels while the loop mode is enabled,
each playlist is played individually to its end before it is looped.
IPDirector - Version 6.00 - User Manual - Playlist Panel
1. Playlist Panel 109