Hotchkis 80413-1 350Z Stage 1 TVS Kit User Manual
Installation of hotchkis front stabilizer bar
22413 FRONT AND REAR SPORT STABILIZER BAR SET
Nissan 350Z/Infiniti G35
Thank you for your purchase from our Hotchkis line of suspension parts.
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis products.
Visit us on the web @
INSTALLATION OF HOTCHKIS FRONT STABILIZER BAR
1)
Please look at the original front antiroll bar and note the orientation of the front bar. You
will want to install the new Hotchkis bar in the same manner.
2)
Securely block the rear wheels of the vehicle. Use a jack to raise the vehicle and
support with jack stands.
3)
Remove the factory plastic undertrays from the car with a 10mm socket on the bolts,
and a small screwdriver to pry open the plastic trim plugs.
4)
Disconnect the endlink from the stabilizer bar using a 14mm wrench.
Document Outline
- INSTALLATION OF HOTCHKIS FRONT STABILIZER BAR
- UImproperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- UImproperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- UInstalled in any vehicle that has been modified;
- UInstalled on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- UInstalled on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- UDid you register the product at U0TUwww.hotchkis.netU0TU or via the mail-in warranty card within 30 days of purchase?
- UIs the product appropriate to your application?
- UDid you carefully and thoroughly read the instructions provided along with the product?
- UDo you have the original invoice or sales receipt?
- UIs the return date within 36 months from the purchase date?
- UAre you the original purchaser?
- UWas the product properly installed by a qualified, licensed auto mechanic?
- UHas the product been installed on the original vehicle on which it was installed at all times?
- UIs the product unmodified and clean?
- UIs the reason for return a legitimate product defect?