Hotchkis 22822 Audi A6 Sport Sway Bar Set Black - Manual

Audi A6Q(’00+)
S6
#22822
Front and Rear Sway Bar Kit Installation
Instructions
Tools Required:
Included In Kit:
1/ 4-Post Lift or Floor Ramps
1/ front and rear Sway Bars
2/ 13mm socket 2/ 4 bushings & 4 brackets
3/ 13mm wrench 3/ 2 front bushing mounting plates
4/ (2) 16mm wrenches 4/ 1 grease pack
5/ 3/8” drive extension (long)
6/ Blue Threadlocker
START WITH THE REAR BAR .
1/
Drive the vehicle onto a 4-post lift or floor ramps. T HE CAR NEEDS TO BE AT
NORMAL RIDE HEIGHT FOR PROPER INSTALLATION . You cannot have the suspension
hanging while installing this bar!
2/
Once vehicle is raised, take a moment and observe the stock rear bar
and the way in which it is mounted
.
3/ Release rear exhaust hangers and middle hangers then let hang. (ok to
use small amount of WD40 to loosen) Or, you may unbolt the hanger brackets
using an extension and 13mm socket.