Hotchkis 22822 Audi A6 Sport Sway Bar Set Black User Manual
Page 6
7/
Re-install the bracket nuts and tighten. Use a small portion of blue
thread-locker on the end-link bolts
, re-install and tighten well.
**Note** If vehicle is raised using jack stands or other, the bar end and the
end link may not align properly. Lower vehicle so that front suspension is
not at full droop and ends will align. Be sure to thread end link bolt by
hand at first to prevent cross-threading
.
8/
Re-install the aero pan.
8/
Re-install the aero pan, however, a small portion of both sides of the pan
may need to be filed down for the bar ends to clear. Make this modification if you
have difficulty attaching the black plastic fasteners within either wheel well.
Some A6s have different aero pans than others.
Enjoy your new tubular Sway Bar kit from Hotchkis! If you need assistance with
the install or have any other questions, go to the ‘instructions’ button on our site
or call us at the number below.
Thank you for choosing the best anti-roll bar kit available for your A6Q!
Hotchkis Performance
Corey Bedortha
562.907.7757 ext 227
12035 Burke St. Suite 13
Santa Fe Springs, CA 90670