Hotchkis 22822 Audi A6 Sport Sway Bar Set Black - Manual (Page 4)

*Adjustability Note: To adjust between the two holes, you must unbolt the
bushing bracket bolts and pull the bar towards the rear so that the end link
bolts clear the shock bodies. The hole at the bar’s end is the softer while
the second hole from the end is the harder setting.
10/
Finally, re-attach exhaust hangers to the metal tabs on both sides.
YOU’RE DONE WITH THE REAR, NOW THE FRONT!!
1/ Drive the vehicle onto a 4-post lift or floor ramps. T HE CAR NEEDS TO BE AT
NORMAL RIDE HEIGHT FOR PROPER INSTALLATION . You cannot have the suspension
hanging while installing this bar!