Hotchkis 22825R BMW E46 Sport Sway Bar, Rear - Manual (Page 2)

2)
Once the vehicle is raised, use a Phillips screwdriver and remove the aero-pan fasteners. Let the pan
hang from the front in order to expose the stock front sway bar.
3)
Take a moment and observe the stock front bar and the way in which it is mounted.
4)
Remove the lower end link nuts using a 16mm wrench and a 17mm wrench for the wrench flat on the
end link itself. Now remove the four bushing bracket nuts and the bar will be free. Save the end link
and bushing bracket nuts.