Hotchkis 22825R BMW E46 Sport Sway Bar, Rear User Manual
Page 7
Advertising
7)
Again using the stock hardware, install the end links to the cast suspension arms making sure the lower
grease fitting points towards the rear of the car.
9)
Apply grease along the inside surface of your polyurethane bushings. Install the rear bushings onto the
bar at the approximate mounting location. Now you may install the Hotchkis rear bar with the H-Sport
sticker facing the rear, right side up.
Note: The bar ends will mount to the inboard side of the end links.
Advertising