Hotchkis 22825R BMW E46 Sport Sway Bar, Rear - Manual (Page 6)

4) Remove the stock bushing brackets on both the driver and passenger sides.
5)
The stock rear bar is now free and can be removed as shown below. If you are having clearance
problems, you may have to remove the bushings and brackets or even twist the end links forward to
remove the bar.
6)
Pay close attention to the way the stock end links are mounted to the brackets. These brackets will be
used to mount the new end links to the upper cast arms. Remove the stock end links from these
brackets and then mount them to the H-Sport end links using the stock hardware. Pay close attention
to zerk fitting direction. The lower Zerk Fitting points towards the rear of the car.