Hotchkis 22825R BMW E46 Sport Sway Bar, Rear - Manual (Page 8)

10) Next, slide the bushing brackets over the bushings. Position the bracket onto the stock mounting point.
You will need to install the provided aluminum reinforcement plate on the backside of the mount.
Fasten the bushing bracket and reinforcement plate together using the provided hardware.
11)
Attach the end links to the bar ends (inner hole for more roll resistance and the outer hole {near the
ends} for less roll resistance) using the 10mm bolts, nylock nuts and small and large washer. Use the
large diameter washer to capture the outboard side of the end link bushing and the smaller washer for
the inboard side against the sway bar end.