Hotchkis 22832R Audi RS4 Sport Rear Sway Bar - Manual

Audi S4 (‘04+)
#22829
Audi A4 (’02+)
#22823
Audi RS4 (’06+)
#22832
Front & Rear Sway Bar Kit Installation Instructions
Tools Required: Included In Kit:
1) 4-Post lift or floor ramps
1) front and rear sway bars
2) 13mm socket 2) 4 bushings & 4 brackets
3) 16mm socket 3) 2 front bushing mounting plates
4) 16mm wrench 4) grease packs
5) 18mm wrench
6) medium extension
(not required, but handy)
START WITH THE REAR BAR .
1/
Drive the vehicle onto a 4-post lift or floor ramps. T HE CAR NEEDS TO BE AT
NORMAL RIDE HEIGHT FOR PROPER INSTALLATION . You cannot have the suspension
hanging while installing this bar!
2/
Once vehicle is raised, take a moment and observe the stock rear bar and
the way in which it is mounted.
3/
Release both sides of the exhaust from the two rubber hangers at the rear
and let hang. (ok to use small amount of WD40 to loosen) or release the
mounting bolts with a 13mm socket.