Hotchkis 22832R Audi RS4 Sport Rear Sway Bar - Manual (Page 2)

4/ Remove the two lower end link bolts (16mm wrench) which attach the
sway bar ends to the end links. You may need to hold the wrench-flat with a
17mm wrench.
5/
Remove the four bushing bracket bolts (13mm wrench) attaching the anti-
roll bar brackets to the sub-frame and save them.
6/
As you begin to remove the bar, gently free each end from the end link
sleeves. Now that the bar is free, slightly lower the exhaust by applying pressure
to the tips just enough to remove the bar towards the front or the rear of the car.