Hotchkis 2221 1997-1999 Dakota 4x4 Sport Sway Bars - Manual (Page 9)

11) Use a 3/4" socket or wrench to tighten up the bolts holding the end links in place. Torque the
hardware to 30 ft/lbs. Make certain that the sway bar can still move. If the bolts are too tight the
sway bar will not function properly causing the suspension to bind.
12) Re-check all hardware for tightness. Cover the zerk fittings with the grease caps provided. Use
a jack to remove the jack stands and lower the vehicle. You are finished with the installation!
IMPORTANT : For proper maintenance, the bushings should be greased at least once a year (15,000
miles) or whenever excessive noise occurs. Use non-lithium grease only ! Lithium-based grease can
wash out with water and should not be used.
SEE NEXT PAGE FOR PARTS LIST