Hotchkis 80410-1 IS300 Stage 1 TVS Kit User Manual
Page 22
4)
The stock sway bar should now be loose and can drop out starting at the driver’s side and slide
out over the exhaust. The Hotchkis bar will install in the same manner as the stock one.
5)
Use the grease pack provided to apply a thick coat of grease to the inside of the sway bar
bushings. Slide the bushings over the bar and place the bushing retainer brackets over the
bushings. You might find it easier to install the bushings and brackets after the Hotchkis bar is in
place on the vehicle due to exhaust clearance of the bar itself.
6)
Lift the Hotchkis bar into the vehicle over the exhaust in the opposite way in which you removed
the stock bar. Slide the frame spacer plate into place for the bushings to rest against as shown.
Use the new Hotchkis hardware to mount the bushing brackets and spacer plate to the sub-
frame.