Ohaus CT Series ELECTRONIC BALANCE - Manual (Page 70)

29
Auto-Zero Auto-Zero Auto-Zero Auto-Zero Auto-Zero
Auto-Zero minimizes the effects of tem-
perature changes and shift on the zero
reading. By defining a threshold level in
divisions, the balance maintains the zero
display until the threshold is exceeded.
This submenu permits you to select one of
three threshold levels, or turn the feature
OFF. Auto-zero only functions when the
display reads zero.
To view or change the auto-zero setting:
1. Access the Auto0 submenu.
2. Press to display the current set-
ting.
3. Press to change the setting.
4. Press to accept the displayed
setting, when released, Auto0 will be
displayed again.
AUTO ZERO AUTO ZERO AUTO ZERO AUTO ZERO AUTO ZERO
OFF Turns Auto-Zero OFF.
.5d
.5d .5d .5d .5d Sets threshold to .5 divisions. Sets threshold to .5 divisions. Sets threshold to .5 divisions. Sets threshold to .5 divisions. Sets threshold to .5 divisions.
1d Sets threshold to 1 division.
3d Sets threshold to 3 divisions.