Parts counting error level – Ohaus CT Series ELECTRONIC BALANCE User Manual
Page 71

30
Parts Counting Error Level
Parts Counting Error Level
Parts Counting Error Level
Parts Counting Error Level
Parts Counting Error Level
The parts counting error level is based on
the resolution (readability) of the particular
model balance and sample weight. The
adjacent table lists error levels that you
can choose from.
To view, change or disable the parts count-
ing error level:
1.
Access the PCErr submenu.
2.
Press
to display the current set-
ting.
3.
Press
to change the setting.
4.
Press
to accept the displayed
setting, when released, PCErr will be
displayed again.
ERROR LEVELS
ERROR LEVELS
ERROR LEVELS
ERROR LEVELS
ERROR LEVELS
OFF
OFF
OFF
OFF
OFF
Disables error level limits.
Disables error level limits.
Disables error level limits.
Disables error level limits.
Disables error level limits.
1 %
±1 % acceptable error.
2.5 %
±2.5 % acceptable error.
5 %
±5.0 % acceptable error.