Velleman VMB1TC - Manual (Page 100)

100 VMB1TC Temperature controller manual – rev 5.0
5. Press and hold the highest push button (COOL) of
the bedroom sensor until the relay is energised and
the red LED on the sensor module flashes.
6. Set the address of the relay module back to its
original value.
Use the relay channel (ex. Channel2) to control the fan.
Set the difference sensor and difference temperature on the sensor of the cooler room via the temperature
controller
7. Press the ‘Location’ button until ‘Cooler room’ is
displayed.
8. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
9. Scroll through the extended menu using the ↑ or ↓
button until the ‘Sensor settings’ item appears.
10. Select the sensor settings menu with the → button.
11. Scroll through the sensor settings menu using the ↑
or ↓ button until the ‘Diff. sensor‘ item appears.
12. Select the diff. sensor item with the → button.
Location
5
↑
↓
Menu
→
Mode
←
Cooler room
Diff. sensor
Location
5
↑
↓
Menu
→
Mode
←
Cooler room
- Mo 14:44 18
Location
5
↑
↓
Menu
→
Mode
←
Cooler room
---
Location
5
↑
↓
Menu
→
Mode
←
Cooler room
Operating mode
Location
5
↑
↓
Menu
→
Mode
←
Cooler room
Sensor settings
Location
5
↑
↓
Menu
→
Mode
←
Cool room
Program