Velleman VMB1TC - Manual (Page 47)

VMB1TC Temperature controller manual – rev 5.0 47
CONFIGURATION OF THE TEMPERATURE SENSORS
Assign sensor names
Default all the temperature sensors will have the same name (‘Temp sensor xx’). To distinguish between the different
temperature sensors it is strongly advised to assign a more meaningful name (e.g. the name of the room) to each sensor.
1. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
2. Scroll through the extended menu using the ↑ or ↓
button until the ‘Sensor settings’ item appears.
3. Select the sensor settings menu with the → button.
4. Scroll through the sensor settings menu using the ↑
or ↓ button until the ‘Change name’ item appears.
5. Select the change name menu with the → button.
The cursor flashes on the first character of the name.
The second line indicates the address of the selected
temperature sensor. With this address the location of
the sensor can be determined.
6. Change the character at the cursor location with the
↑ or ↓ button and confirm with the → button.
The cursor moves to the next character.
Location
5
↑
↓
Menu
→
Mode
←
K_mp sensor 01
01 Change name
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Program
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Sensor settings
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Operating mode
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Change name
Location
5
↑
↓
Menu
→
Mode
←
_emp sensor 01
01 Change name