Velleman VMB1TC - Manual (Page 86)

86 VMB1TC Temperature controller manual – rev 5.0
PROGRAMMING
The controller can handle up to 32 temperature sensors VMB1TS. Every room that needs to be heated or cooled must
have its own temperature sensor. These rooms can be divided over 7 zones if desired.
For every room or zone a program instruction set is available. There is also a program instruction set foreseen for all
rooms together.
In every program a maximum of 31 instructions can be stored.
A program instruction consists of 3 parts:
1. The days on which the program instruction is applicable:
• Day program: every Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday
• Working day program: from Monday to Friday (included) or from Monday to Saturday (included)
• Weekend program: every Saturday and Sunday
• Week program: every day
2. The exact time at which the instruction is to be executed:
• Exact indicated time
• The wake-up time plus or minus a certain time period
• The go-to-bed time plus or minus a certain time period
3. The mode to which the heating or air-conditioning should be set:
• Comfort mode
• Day mode
• Night mode
• Anti-freeze mode
Tips:
• Program instructions that are applicable for all rooms should be programmed under the ‘all rooms’ program. This
way the instruction has to be entered only once in stead of for each room separately.
• The same goes for common program instructions that are valid for all rooms in the same zone. Select the zone on
the controller and enter the program instruction into the zone program.
• Program instructions that are unique for a room must be entered into the program of that room.
• Consider using wake-up or go-to-bed times inside the program instructions. When a certain instruction needs to be
carried out at a different time, only the wake-up or go-to-bed time needs to change, not the whole program.
For example, set the heating for bathroom, kitchen and living room in day mode half an hour before wake-up time;
set the bathroom heating back to night mode 1 hour after wake-up time. If one feels like sleeping longer or getting
up earlier, only changing the wake-up time is needed.
Remarks:
• As soon as a program is available for a certain room, a ‘ p ‘ will appear on the display behind the mode symbol.
Location
5
↑
↓
Menu
→
Mode
←
Living room
p Mo 14:23 23