Velleman VMB1TC - Manual (Page 53)

VMB1TC Temperature controller manual – rev 5.0 53
Heating or cooling mode
Default the sensor is programmed for heating installations. It is possible however to use it for controlling air-conditioning
systems.
1. Press the ‘Location’ button repeatedly until the
desired sensor or zone is displayed.
2. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
3. Scroll through the extended menu using the ↑ or ↓
button until the ‘Sensor settings’ item appears.
4. Select the sensor settings menu with the → button.
5. Select the operating mode menu with the → button.
6. Change the mode to heating or cooling using the ↑
or ↓ button.
7. Confirm with the → button.
8. Exit the menu with the 5 button.
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Program
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sensor settings
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Operating mode
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Mode _________
Location
5
↑
↓
Menu
→
Mode
←
All rooms
? Mo 14:36
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Operating mode
Location
5
↑
↓
Menu
→
Mode
←
All rooms
? Mo 14:36
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Mode heating