Velleman VMB1TC - Manual (Page 41)

VMB1TC Temperature controller manual – rev 5.0 41
Setting the alarm clock
The module contains an alarm clock that can be enabled or disabled. The alarm times can be used in a thermostat
program but also to control an output module (e.g. a relay module).
E.g. the wake-up time can be used to switch on the heating while the go-to-bed time can be used to switch the heating
off.
1. Open the menu by pressing the ‘Menu’ button.
2. Scroll through the menu using the ↑ button until the
‘Alarm set’ item appears.
3. Select the alarm set menu with the → button.
The alarm-indication flashes.
4. Set the alarm clock function with the ↑ or ↓ button.
5. Confirm with the → button.
The hour-indication of the wake-up time flashes.
6. Set the hour of the wake-up time with the ↑ or ↓
button.
7. Confirm with the → button.
The minutes-indication of the wake-up time flashes.
8. Set the minutes of the wake-up time with the ↑ or ↓
button.
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Temp. settings
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Alarm clock set
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Alarm clock: ___
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Alarm clock: On
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Wake-up __:00
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Wake-up 7:00
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Wake-up 7:__
Location
5
↑
↓
Menu
→
Mode
←
Temp sensor 01
Wake-up 7:10