Embedding a temperature sensor – Velleman VMB1TC User Manual
Page 9
Advertising
![background image](/manuals/259565/9/background.png)
VMB1TC Temperature controller manual – rev 5.0
9
EMBEDDING A TEMPERATURE SENSOR
The temperature sensor VMB1TS can be embedded in combination with two blank frames VMBFBI and a Velbus cover
plate VMBFDG or VMBFLG. Push the modules from the back into the cover plate.
It is also possible to use a 2- or 3-module wide frame with cover plate from the BTicino Living series. The module must be
pushed into the build-in frame from the front.
It is also possible to use a 2- or 3-module wide frame with cover plate from the BTicino Light or Light Tech series. The
module must be pushed into the build-in frame from the front.
To build the sensor in into a hollow wall, use a hollow wall pattress.
Advertising