Velleman VMB1TC - Manual (Page 75)

VMB1TC Temperature controller manual – rev 5.0 75
When a room is selected on the controller the heating (or cooling) mode can be adjusted.
When a zone is selected on the controller the heating (or cooling) mode of all rooms that belong to that zone will be
adjusted.
1. First select the desired room or zone with the ‘Location’ button
2. Press the ‘Mode’ button (bottom left) multiple times until the desired mode (
-
, , or ) is displayed.
To indicate that temporary mode (sleep timer) is enabled, the LED on the ‘Mode’ button starts flashing and the display
shows an hourglass. The indication LEDs on the sensor module also will flash.
The remaining time of the sleep timer is shown on the display except when a zone was selected.
symbol mode
- Temporarily in anti-freeze mode
Temporarily in night mode
Temporarily in day mode
Temporarily in comfort mode
? The mode is not the same for every room inside
the zone
Remark:
Temporary mode (sleep timer) can be cancelled by pushing and holding the ‘Mode’ button until the hourglass is not longer
shown on the display.
The chosen mode remains active until the next program instruction.
Location
5
↑
↓
Menu
→
Mode
←
Bathroom
1h 0m 17
Location
5
↑
↓
Menu
→
Mode
←
Bathroom
Mo 14:23 17