Velleman VMB1TC - Manual (Page 59)

VMB1TC Temperature controller manual – rev 5.0 59
Heating limit
This is the maximum desired room temperature that can be set. Default it is set to 30° but the user can change this limit.
This could be useful to make sure that the desired room temperature is never set to a value higher than a certain
predefined value.
1. Press the ‘Location’ button repeatedly until the
desired sensor or zone for which the upper heat
temp. will be set is displayed.
2. Press and hold the ‘Menu’ button for ±4 seconds to
open the extended menu.
3. Scroll through the extended menu using the ↑ or ↓
button until the ‘Sensor settings’ item appears.
4. Select the sensor settings menu with the → button.
5. Scroll through the sensor settings menu using the ↑
or ↓ button until the ‘Upper heat temp’ item appears.
6. Select the upper heat temp. menu with the → button.
7. Set the upper heat temp. with the ↑ or ↓ buttons.
8. Confirm with the → button.
9. Exit the menu with the 5 button.
Location
5
↑
↓
Menu
→
Mode
←
All rooms
? Mo 14:42
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Upper heat temp
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Upper heat temp
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Upper heat 23
Location
5
↑
↓
Menu
→
Mode
←
All rooms
? Ma 14:41
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Upper heat ___
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Operating mode
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Sensor settings
Location
5
↑
↓
Menu
→
Mode
←
All rooms
Program