Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) PowerPack & Stinger w_EconoMind '06-07 For use with PowerPDA User Manual
Page 16
Advertising
16
96813 v.9.0
42.
Gently bend the engine oil
dipstick tube to it’s mounting location
on the High Ram as shown in Figure
15. Secure the dipstick tube with
the factory bolt that was previously
removed.
43.
Remove rag that was used to
cover the boost tube opening. Make
the connection between the driver
side boost tube and the High-Ram.
Tighten all the driver side hose
clamps to 5 ft-lbs (60 in-lbs).
-END, SEcTION 2-
Figure 15. Exploded view of the High-Ram assembly
Advertising