Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) PowerPack & Stinger w_EconoMind '06-07 For use with PowerPDA - Manual (Page 31)

96813 v.9.0
31
Your EconoMind Diesel Tuner displays
the “4,3” diagnostic code (refer to
TROUBLESHOOTING in Section
10 on how to read codes) when it
needs to learn your transmission
configuration. This always occurs
when the EconoMind Diesel Tuner
is first installed on the truck. The
EconoMind Diesel Tuner is equipped
with advanced safety features to
preserve your automatic transmission.
One of them is the capability to detect
the occurrence of transmission slip,
and it will automatically de-rate the
engine output power accordingly.
Before this safety feature can take
effect, the EconoMind Diesel Tuner
needs to learn that your truck
is equipped with an automatic
transmission.
1.
The following driving test shall
be performed in an area where
speeds over 55mph are safe and
traffic is light. For a vehicle with a
manual transmission, follow Step
2. For a vehicle with an automatic
transmission, follow Step 3. While
driving, listen for any exhaust leaks or
rattles, or intake boost leaks. After the
engine cools, re-tighten clamps and
hoses if leaks are detected.
2.
(Manual Transmission) To
teach the EconoMind Diesel Tuner
that your truck is equipped with a
manual transmission, drive the truck
at a speed over 55 mph for at least
2 minutes. The “4,3” diagnostic code
will be eliminated.
Repeat if necessary to eliminate code.
Proceed to Section 10.
3.
(Automatic Transmission) To
teach the EconoMind Diesel Tuner
that your truck is equipped with an
automatic transmission drive the
truck at a speed over 55mph until
the torque converter is locked (the
torque converter is usually locked at
speeds over 55mph). With the torque
converter locked and with turbo boost
below 10psig (ie, light load), maintain
the attained speed steadily for at least
30 seconds. Once the transmission is
learned, the “4,3” diagnostic code will
be eliminated. Repeat if necessary to
eliminate code.
-END, SEcTION 9-
Section 9
TRANSMISSIoN LEARNING