Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) PowerPack & Stinger w_EconoMind '06-07 For use with PowerPDA User Manual
Page 25
Advertising
96813 v.9.0
25
17.
Make sure the fuse box cover
surface is clean and free of dirt and
oil before mounting the EconoMind
Diesel Tuner. clean and dry as
required using a cloth dampened
with rubbing alcohol or a similar
cleaning solution.
CAuTIoN: Do not spray fluid
directly onto any electrical
equipment, or equipment damage
may result. Mount the EconoMind
Diesel Tuner on the top of the
fuse box cover as shown in Figure
1, by peeling the protective
backing off the adhesive tape on
the back of the EconoMind Diesel
Tuner.
18.
Hold the EconoMind Tuner
against the fuse box cover for
approximately 1 minute while
applying pressure to allow the
adhesive to properly adhere to the
surface.
-END, SEcTION 5-
Figure 28
Figure 29
Advertising