Banks Power Universal Car & Truck: (Gas or Diesel ’50 - 14 Universal) Water-Methanol: Straight-Shot and Double Shot, Universal applications - Manual (Page 27)

97650 v.1.0
27
45000 Straight-Shot - Methanol-Water Injection System, Low Volume - Universal Application
45000-1 Base System, Methanol-Water Injection - Controller w/ Onboard MAP Sensor 1
45021 Module, Injection Controller-w/MAP Sensor - Methanol-Water Injection 1
45111 Boost Line Kit - Methanol-Water Injection Systems 1
45121 Fitting, 90 Deg Swivel, 1/4" NPTM- 1/4" Push Lock - MWI 1
62001 Cable Tie, Black, 6" - 12
62034 Connector, T-Tap, Red - 22-18 Gauge 1
62038 Fuse Tap, Blade 1
62831 Pump Harness, Water-Methanol Injection Controller 1
62832 Signal Harness, Contoller - Methanol-Water Injection 1
62837 Sub-Harness, Switch, Pump Pressure - Methanol-Water Injection 1
63001 Mounting Panel, One Gauge - Black, W/Fasteners 1
63006 Bracket, Module, Six-Gun/Bullet/WMI - Various Applications 1
91102 Washer, Sae Flat, Zinc - 1/4" 8
91761 Hex Bolt, Flange Head - 6Mm-1.00 X 45MM 4
91771 Nut, Nylock - M6 X 1.0, Zinc 4
91846 Washer, Internal Tooth Lock - #8 2
91868 Hex Nut, Zinc - 8-32 2
97650 Owner's Manual - Methanol-Water Injection System - Universal Application 1
97650-A Addendum, Owner's Manual-Schematic - MWI - Universal Application 1
45031 Pump Assy, Low Volume, Methanol-Water Injection 1
45031-01 Pump, Low Volume, Methanol-Water Injection 1
62480 Housing, 2 Contact Shroud Half - Solenoid Assy, Cbc-04-06 Dodge 1
62481 Terminal, Male 20-18 Ga - Solenoid Assy, Cbc-04-06 Dodge 2
62482 Cable Seal, Green - Solenoid Assy, Cbc-04-06 Dodge 2
45061 Injection Nozzle Kit-1, Methanol-Water Injection Systems 1
45085 Injection Nozzle, Methanol-Water, #4, 30lb/hr @ 100PSI, 100 Degree Full Cone 1
45087 Injection Nozzle, Methanol-Water, #7, 52lb/hr @ 100PSI, 100 Degree Full Cone 1
45122 Fitting, Nozzle, 90 Deg Swivel, 1/4" NPTF- 1/4" Push Lock - MWI 1
91099 Teflon Tape, 1/2" X 100" - 1
45140 Tubing, 0.040" Wall, Nylon 11, Black-Methanol-Water Inj 10
45001 Straight-Shot - Methanol-Water Injection System, High Volume - Universal Application
45000-1 Base System, Methanol-Water Injection - Controller w/ Onboard MAP Sensor 1
45030 Pump Assy, High Volume, Methanol-Water Injection 1
45030-01 Pump, High Volume, Methanol-Water Injection 1
62480 Housing, 2 Contact Shroud Half - Solenoid Assy, Cbc-04-06 Dodge 1
62481 Terminal, Male 20-18 Ga - Solenoid Assy, Cbc-04-06 Dodge 2
62482 Cable Seal, Green - Solenoid Assy, Cbc-04-06 Dodge 2
45062 Injection Nozzle Kit-2, Methanol-Water Injection Systems 1
45085 Injection Nozzle, Methanol-Water, #4, 30lb/hr @ 100PSI, 100 Degree Full Cone 1
45087 Injection Nozzle, Methanol-Water, #7, 52lb/hr @ 100PSI, 100 Degree Full Cone 1
45090 Injection Nozzle, Methanol-Water, #14, 103lb/hr @ 100PSI, 100 Degree Full Cone 1
45122 Fitting, Nozzle, 90 Deg Swivel, 1/4" NPTF- 1/4" Push Lock - MWI 2
45123 Fitting,"Y", Female 1/4" Push-Lock, Black Nylon - MWI 1
91099 Teflon Tape, 1/2" X 100" - 1
45140 Tubing, 0.040" Wall, Nylon 11, Black-Methanol-Water Inj 10
45002 Double-Shot - Methanol-Water Injection System, Low Volume - Universal Application
45000-1 Base System, Methanol-Water Injection - Controller w/ Onboard MAP Sensor 1
45031 Pump Assy, Low Volume, Methanol-Water Injection 1
45040 Solenoid Kit, Methanol-Water Injection 1
45035 Solenoid, Methanol-Water Injection 1
45038 Bracket, Solenoid Mount, Single - Methanol-Water Injection 1
45120 Fitting, Straight, 1/4" NPTM - 1/4" Push Lock - MWI 2
91102 Washer, Sae Flat, Zinc - 1/4" 4
91110 Nut, Nylock - 1/4"-20 2
91118 Hex Bolt, Grade 5, Zinc - 1/4"-20 X 1" 2
91725 Screw - Button Head, Socket Cap - 10-32 X 3/8" - 18.8-S/S 2
91826 Washer, Int Tooth Lock, Zinc - #10 2
45050 Check Valve, In-line - Methanol-Water Injection 1
45070 Injection Nozzle Kit-10, Methanol-Water Injection Systems 1
45083 Injection Nozzle, Methanol-Water, #2, 15lb/hr @ 100PSI, 100 Degree Full 1
45085 Injection Nozzle, Methanol-Water, #4, 30lb/hr @ 100PSI, 100 Degree Full Cone 1
45087 Injection Nozzle, Methanol-Water, #7, 52lb/hr @ 100PSI, 100 Degree Full Cone 1
45122 Fitting, Nozzle, 90 Deg Swivel, 1/4" NPTF- 1/4" Push Lock - MWI 2
45123 Fitting,"Y", Female 1/4" Push-Lock, Black Nylon - MWI 2
91099 Teflon Tape, 1/2" X 100" - 1
45108 Thermocouple Kit - Methanol-Water Injection Systems 1
62001 Cable Tie, Black, 6" - 6
63042 Thermocouple, Pyrometer - Chevy, Dodge, Ford Pwr Sys 1
63060 Leadwire, Pyrometer, Electric - Various Applications 1
92273 Weld Bung, 1/4" NPT 1
95015 Box, 6X6X6 - 200# Rsc 1
45140 Tubing, 0.040" Wall, Nylon 11, Black-Methanol-Water Inj 25
45144 Tank Kit, 2.5 Gallon - Methanol-Water Injection 1
45096 Tank, 2.5 Gal, PE, Natural, with 1/4" FPT Fitting weld-on; 2.25" Top Vented Cap, Black, w/8" Tether 1
91103 Washer, Uss, Zinc - 1/4" 8
91110 Nut, Nylock - 1/4"-20 4
91120 Hex Bolt, Grade 5, Zinc - 1/4"-20 X 1 1/8" 4
91590 Strap, Mounting - MWI Tank, Small 2
45003 Double-Shot - Methanol-Water Injection System, High Volume - Universal Application
45000-1 Base System, Methanol-Water Injection - Controller w/ Onboard MAP Sensor 1
45030 Pump Assy, High Volume, Methanol-Water Injection 1
45040 Solenoid Kit, Methanol-Water Injection 1
45050 Check Valve, In-line - Methanol-Water Injection 1
45071 Injection Nozzle Kit-11, Methanol-Water Injection Systems 1
45084 Injection Nozzle, Methanol-Water, #3, 22lb/hr @ 100PSI, 100 Degree Full Cone 1
45087 Injection Nozzle, Methanol-Water, #7, 52lb/hr @ 100PSI, 100 Degree Full Cone 1
45088 Injection Nozzle, Methanol-Water, #10, 74lb/hr @ 100PSI, 100 Degree Full Cone 1
45090 Injection Nozzle, Methanol-Water, #14, 103lb/hr @ 100PSI, 100 Degree Full Cone 1
45122 Fitting, Nozzle, 90 Deg Swivel, 1/4" NPTF- 1/4" Push Lock - MWI 2
45123 Fitting,"Y", Female 1/4" Push-Lock, Black Nylon - MWI 2
91099 Teflon Tape, 1/2" X 100" - 1
45108 Thermocouple Kit - Methanol-Water Injection Systems 1
45140 Tubing, 0.040" Wall, Nylon 11, Black-Methanol-Water Inj 25
45147 Tank Kit, 7 Gallon - Methanol-Water Injection 1
45098 Tank, 7 Gal, PE, Natural, with 1/4" FPT Fitting weld-on; 3.5" Top Vented Cap, Black, w/8" Tether 1
91103 Washer, Uss, Zinc - 1/4" 8
91110 Nut, Nylock - 1/4"-20 4
91120 Hex Bolt, Grade 5, Zinc - 1/4"-20 X 1 1/8" 4
91592 Strap, Mounting - MWI Tank, Large 2
Kits used in more than one injection system (i.e. 45000-1) are listed in full only once . See a previous system for all parts in that kit.
Kits used in more than one injection system (i.e. 45000-1) are listed in full only once . See a previous system for all parts in that kit.
Kits used in more than one injection system (i.e. 45000-1) are listed in full only once . See a previous system for all parts in that kit.