Banks Power Ford Trucks: (Diesel ’08 - 10 6.4L Power Stroke) Tuner- Six-Gun Diesel Tuner & Banks Brake '08-10 For use with Six-Gun switch Only - Manual (Page 23)

96511 v.7.0
23
OPERATION/DRIVING
Now that you are familiar with the
features that are available with Banks
Brake, it is recommended that you
experiment with the various settings
prior to using the braking features in
a towing or extreme driving situation.
Under light load conditions on local
streets, the MEDIUM (MED) setting is
an appropriate starting point to provide
a reasonable demonstration that the
brake is functioning.
Note: Whenever the brake is active
and the footbrake is applied, the
vehicle will not upshift until the throttle
is pressed. this is also true even if
cruise control is resumed.
For some model vehicles, whenever the
brake is active the vehicles tow-haul
mode will activate. the tow-haul mode
will deactivate when the Banks Brake is
deactivated.
WHEEL SLIP DETECTION
The Banks Brake continuously
monitors wheel speeds to detect
possible slippage caused by braking.
If this occurs, the brake will shut off
until traction is regained and then
remain off for 30 seconds. This will be
communicated as a fault via the Banks
iQ Status Indicator.
-END, SECTION 4-
Figure 22: Banks Brake Selector
Switch Guide