Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-970 - Manual (Page 10)

PNEG-970 2 Hopper w/ Collector Ring 10
Safety
Please remember safety signs provide important safety information for people
working near bin unloading equipment that is in operation.
Any safety signs that are worn, missing, illegible or painted over should be
replaced immediately. Obtain FREE replacements by contacting GSI.
Decals
A. The images below show the location of the decals and safety signs which should appear on
the Series II Sweep hopper with collector ring.
Decal “D” (DC-1224) on
side of collector
ring shield
Decal “D” (DC-1224) on
top of collector ring
shield plate
Decal “A”
Location:
Top of shield plate
and side of shield.
Size: 2 7/8” x 5”
Part No.: DC-1224