Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-970 - Manual (Page 25)

PNEG-970 S2 Hopper w/ Collector Ring 25
Assembly
1" x 48" flex
conduit
1" flex conduit
coupling
1" conduit
coupling
pivot tube
D. Feed the nine (9) stranded wires from the collector ring through one of the holes in the right
junction box.
E. Connect the 1" x 48" liquid-tight flex conduit assembly to the junction box using the 1" liquid-
tight flex conduit coupling.
3. WIRE THE COLLECTOR RING TO THE SWEEP
A. Attach one(1) 1" liquid-tight flex conduit coupling to each end of the 1" x 48" liquid-tight flex
conduit.
B. Feed the nine (9) stranded wires from the collector ring through the 1" conduit coupling and
1" x 48" liquid-tight flex conduit assembly.
C. Attach the 1" x 48" liquid-tight flex conduit assembly to the pivot tube using the 1" conduit
coupling.