Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-970 - Manual (Page 17)

PNEG-970 S2 Hopper w/ Collector Ring 17
Assembly
1. ASSEMBLE THE CROSSBRACE (cont.)
D. Bolt the collector ring shield to the crossbrace assembly using four (4) 1/4"-20 x 1" hex bolts,
flat washers, lock washers, and hex nuts. Do not use the remaining bolts.
1/4"-20 x 1" hex bolt
hex nut
lock washer
crossbrace assembly
collector ring shield
flat washer