Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-970 - Manual (Page 15)

PNEG-970 S2 Hopper w/ Collector Ring 15
Assembly
1. ASSEMBLE THE CROSSBRACE
A. Assemble the 1" x 9 3/8" conduit to the 1" chase nipple using one (1) 1" conduit coupling.
B. Feed the nine (9) stranded wires from the collector ring through the conduit assembly and
fasten it to the collector ring.
nine (9) stranded wires
1" chase nipple
1" conduit coupling
1" x 9 3/8" conduit
collector ring