Top stiffener starting location, Installing stiffeners – Grain Systems Tanks PNEG-1095 User Manual
Page 48
Advertising
6. Installation
48
PNEG-1095 FCDL 4.00" Corrugation Externally Stiffened Grain Bin
Top Stiffener Starting Location
Installing Stiffeners
1. All stiffeners are to be installed on the exterior of the bin. Be sure and use 5/16" x 3/4" grade 5
bin bolt with neoprene washer with the bolt head and washer on the inside of the grain bin. Refer to
spread chart for proper location of stiffeners and sidewall sheets on
Figure 6F
Figure 6G
Advertising