Grain Systems Tanks PNEG-1461 - Manual (Page 117)

16. Parts List
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series 117
NOTE: Bolt listed first and nut second for each usage.
18' Diameter 45° Hopper Bin Hardware Specifications Parts List
Ref # Part # Description Qty
1
S-10260
Bulk Tank Peak Ring to Roof Panels (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
36
S-7484 36
2
S-10260
Roof Panel to Roof Panel (Use 5/16" x 1" Hex Head Bin Bolts and 5/16" Hex Nuts.)
504
S-7484 504
3
S-10260
Roof Panels to Top Sidewall Sheets (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
216
S-7484 216
4
S-10260
Vertical Sidewall Sheet Seams (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
S-7484 Varies
5
S-10260
Horizontal Sidewall Sheet Seams (Use 5/16" x 1" Hex Head Bin Bolts and
5/16" Hex Nuts.)
Varies
S-7484 Varies
6
S-10260
Leg to Sidewall Sheet (Use 5/16" x 1" Hex Head Bin Bolts and 5/16" Hex Nuts.)
(Bolt Heads to Inside of Tank.)
396
S-7484 396
7
S-10260
Hopper Panels to Sidewall Sheet (Use 5/16" x 1" Hex Head Bin Bolts and 5/16"
Hex Nuts.) (Bolt Head to Inside at Leg to Hopper to Sidewall Connection Only.)
288
S-7484 288
8
S-10267
Vertical Hopper Seams (Use 5/16" x 3/4" Truss Head Bin Bolts and 5/16" Flanged
Whiz Nuts.) (Bolt Heads to Inside of Tank.)
1260
S-10268 1260
9
S-10267
Vertical Hopper Seams (Use 5/16" x 3/4" Truss Head Bin Bolts and 5/16" Flanged
Whiz Nuts.) (Bolt Heads to Inside of Tank.) (16" Shown.)
36
S-10268 36
10
S-7485
Hopper Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
3
S-7489 3
11
S-7485
Cross Tie Brace to Leg (Use 3/8" x 1" Flange Head Bolts and 3/8" Hex Nuts.)
108
S-7489 108
Ref # Description Ref # Description
A Inside H Leg
B Outside I Hopper Reinforcement Angle (Optional)
C Roof Sheet J Leg Cross Tie
D 18' Roof Stiffener Channel K Offset Hopper Panel
E Body Sheet L Hopper Collar
F Peak Ring Collar M Hopper Brace
G Hopper Panel