Grain Systems Tanks PNEG-1461 - Manual (Page 92)

92 PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series
14. Raising Bin
Raising Bin to Set on Foundation
Be sure that all bolts are tightened properly. The Bulk Feed Tank can now be set up on foundation. A crane
of adequate capacity attached to a spider assembly with cables connecting at each vertical sidewall seam
just above the legs will usually do the job. Reference a qualified rigger.
Standard Hopper Bin Anchoring
Figure 14A
Make sure there is enough clearance between the tank and surrounding power
lines, electrocution may occur.
WARNING
WARNING
All usual and customary precautions must be taken to ensure safety of
personnel and property.
NOTE: Leg shims are not standard equipmentand must be obtained locally.