Grain Systems Tanks PNEG-1461 - Manual (Page 40)

40 PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series
8. Optional BFT Ladder Assembly
Optional BFT Ladder Assembly
The components needed to complete the eave ladder assembly are listed in the chart below and are
numbered in the order of assembly. Review the installation instructions for each component before
beginning. Failure to do so may complicate the installation and cause unnecessary field drilling.
(See Figure 8A.)
Figure 8A
Ref # Description Qty
A L.H. Starter Bracket 1
B R.H. Starter Bracket 1
C Top 4' Ladder Section 1
D Connector Bracket 2
E Roof Ladder Section 1
F Roof Ladder Support Bracket 4
G Standoff Bracket 2
H Wedge 6
See Page 41 for proper
orientation of bracket.