Safety cage – Grain Systems Tanks PNEG-1461 User Manual
Page 66
10. Safety Cage
66
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series
24"-48" Safety Cage Bell Section
Attach the vertical supports to the hoop half assembly from the final safety cage installation using
5/16" x 1" bolts and nuts with the head of the bolt to the inside of the safety cage. Assemble the special
bell hoop halves and attach to the other end of the vertical supports. The vertical supports must be bent
at the flat area to allow for the angle of the bell section. Attach the safety cage brackets to the ladder as
shown
. Once the safety cage brackets are installed, attach the bell safety cage
hoop half assembly to the safety cage brackets. Tighten bolts as you go.
Figure 10H
Ref #
Part #
Description
A
LS-6714
24" Vertical Support
B
LS-4202
Safety Cage Bell Hoop Half
C
LS-6713
48" Vertical Support
24" Bell
48" Bell