Grain Systems Tanks PNEG-1461 - Manual (Page 49)

8. Optional BFT Ladder Assembly
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series 49
Ladder Standoff Installation
With the sidewall ladder in place, standoff brackets must be installed on the ladder and attached to the
sidewall at each horizontal seam (every 32"). Start by assembling the standoff bracket and wedge to the
ladder rail as shown in
Figure 8M . Then, slide the standoff assembly along the ladder rail until the standoff
is in line with the pre-punched hole in the horizontal seam and attach to the sidewall using 5/16" x 1"
bin bolts.
Figure 8M
Ref # Description
A Roof Ladder
B Connector Bracket
C Starter Bracket
D Sidewall Ladder
E Standoff Bracket (Two (2) Per Seam) (LDR-4314)
F Horizontal Seam
G 32" Typical