Grain Systems Tanks PNEG-1461 - Manual (Page 95)

PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series 95
15. Pneumatic Fill Kit
Pneumatic Fill Kit Assembly
NOTE: Inlet and exhaust parts from roof eave upward supplied with kit.
Figure 15A
Ref # Description Ref # Description
A Fill E Cupped Washer
B Exhaust F Fill tube is 4" diameter (Available)
C 5/16" Square Neck Bolt G Exhaust tube is 6" diameter
D Hex Nut 5/16"-18 JS Grade 5 (S-7484) H 5-5/8" Diameter Hole
15' Roof panel 12' Roof panel