Platform installation – Grain Systems PNEG-349 User Manual
Page 15
Advertising
15
Service Platform & Stiffener
PLATFORM INSTALLATION
Figure 19: Installing front long floor panel.
6. Connect the right-hand inner toe
board.
7. Place the short wide floor pan-
els on the left-hand side of the
platform at the rear.
8. Place the four short floor panels on
the right-hand side at the rear.
9. Place the three long floor panels
across the front end of the platform.
10. Connect the remaining toe boards
around the platform.
Figure 20: Installing the remaining toe boards.
Advertising