Grain Systems PNEG-349 - Manual (Page 8)

8
Service Platform & Stiffener PLATFORM INSTALLATION
Figure 5: Placing rear tie angle on platform.
5. Position the rear angle tie, D01-
2034, and connect it onto the
rear anchor channels using
5/16" x 1" carriage head bolts.
6. Position the front channel, D61-
0061, so the side with the large
holes is up and connect it to
the two side channels. Use flat-
head allen capscrews to secure
the top side.
Figure 6: Tighten the rear frame tie angle to the side frame.