Platform installation – Grain Systems PNEG-349 User Manual
Page 7
Advertising
7
Service Platform & Stiffener
PLATFORM INSTALLATION
Figure 4: Attaching side channels.
Figure 3: Bolting reinforcement plate to main support channel.
3. Attach the D61-0056 reinforce-
ment plate to the main floor sup-
port channel using 5/16" x 3/4"
whiz bolts.
4. Position the left-hand side chan-
nel, D61-0058, and the right-
hand side channel, D61-0057,
so the sides with the dimpled
holes are up. Connect them to
the rear anchor channels and
the main support channel. Use
the special 5/16" diameter flat
head allen capscrews to secure
the top side of the two side chan-
nels. Use 5/16" x 3/4" bolts at
the bottom side.
Advertising