Grain Systems PNEG-1935 - Manual (Page 13)

PNEG-1935 Vision Hybrid for Portable Dryers 13
3. Vision Control Panel
Figure 3A
Control Power Switch
The Vision control system is turned ON or OFF with this switch.
NOTE: This switch does not disconnect the power that is present at the breakers, contactors, transformer(s),
fuses or other electrical components found in the upper and lower control boxes. Turn the main
disconnect handle to the OFF position prior to servicing any of the installed components.
Stop Button
This button stops all dryer functions. If an automatic dryer shutdown occurs, first determine and correct
the cause of the shutdown. Then, press the Stop button to reset the dryer before restarting.
Fan switches
Load switch
Unload switch
Outside
Light switch
Control
Power switch
Stop button
Start switch
Meter Roll
Adjustment
Touch screen
Heater switches