Grain Systems PNEG-1935 - Manual (Page 14)

3. Vision Control Panel
14 PNEG-1935 Vision Hybrid for Portable Dryers
Outside Light Switch
The dryers outside service light is turned ON or OFF here. It also can be set on AUTO, which turns the
light ON while the dryer is running and OFF if a shutdown occurs.
Start Button
Push the Start button and all of the selector switches on the control panel will be activated.
Unload Switch
The Unload switch turns the metering rolls and discharge auger ON or OFF and selects the operation of
the metering rolls. In the MANUAL position, the meter rolls will operate in one Speed only. In the AUTO
position, the meter rolls switch to a multi-speed mode for moisture control operation. The switch will
illuminate whenever the load auger is operating.
NOTE: If the unload auxiliary controls are being used, this switch will also control the operation of the
auxiliary equipment.
Meter Roll Adjustment
This knob allows the user to adjust the meter roll setpoint(s). Pressing the knob will bring up the “Modifying
Meter Roll Speed Setpoints” screen.
(See Figure 3B.)
Figure 3B
NOTE: Screen may vary depending on the moisture control scheme selected.
Turning the knob clockwise will adjust the selected (red color) setpoint in a positive direction and vice
versa. Pressing the knob will switch between setpoints.